ASR-030D and ASR-031D
sled,rfid ipad air,read rfid with iphone,iphone read rfid,ipad rfid,rfid jacket,iphone 7 rfid,ASR-030D / ASR-031D of AsReader series is the modular type RFID reader/writer for iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 5, iPhone 5s, iPhone SE, iPod touch 5th and 6th gen, and iPad Air2 and Pro9.7. It is either around 860 or 920MHz UHF band RFID reader/writer and has FCC and CE certification for each model.
ASR-030D and ASR-031D
Model Name ASR-030D and ASR-031D
RFID Spec ISO 18000-63 (Formerly known as: ISO 18000-6 Type C) / EPC Class1 Gen2
Bandwidth ASR-030D: 902 - 928MHz | ASR-031D: 865.6 - 867.6MHz
*Please contact us for your local standard. It can be modified for other countries with firmware updates.
Output power 316mW(25dBm)
Reading distance About 2m / 6 feet(*2)
Polarization characteristics Circularly Polarized Antenna
Function Read / Write / Lock / Kill
Battery Battery Capacity Built-in rechargeable lithium-ion battery 700mAh
Continuous operation time 7 hours or more. Approximately 40,000 scans. (*3)
Power Source Magconn Cable (*4)
Charging time About 2 hours (Built-in battery)(*5)
Key input 2 Trigger keys
Communication Interface MFi on Lightning (*6)
Appearance Dimensions (W)x(D)x(H) 63.7 × 9.7 × 117.2mm
Weight(with Battery) About 75g
Material PC
Casing color White
LED Non-blinking Blue LED: Connected with device (*7).
Blinking Blue LED: Reading RFID tag.
Non-blinking Red LED: Battery is charging.
Faint Red LED: Battery is fully charged
Environment Operating environment -10~45℃, 20~85 % RH(Charge at 0 ℃ or more)
Storage environment -20~60℃, 10~95 % RH
IP Rating IP54 compliance
Anti-drop (Six-sided * 4 edge, once each) 1.5m/ 4.5 feet (*8)
Certificate TELEC / Apple Mfi / FCC / CE
Requirments OS iOS8.0 or later (except iOS9.2.x)
Bundled items Magconn cable / Earphone extension cable /manual

*1 The radio frequency bandwidth can be modified between these levels using software.
*2 It may depend on the type of IC tags and operating circumstances.
*3 iPhone's battery will last about 4.5hrs/25,000 times continuous reading on iPhone's default brightness setting. At which point AsReader's battery will still have about 50% charge.
*4 Standard iPhone 1A charger is strongly recommended to be used when using Magconn cable.
*5 iPhone and AsReader batteries will charge simultaneously. iPhone and AsReader batteries will be recharged in 3.5 hrs and 2 hrs respectively in simultaneous recharging mode.
*6 SDK is available for free download. 
*7 Blue LED will turn on after iPhone/iPod is connected. LED will turn off after the reading the first tag.
*8 iPhone screen could be broken, depending on the drop angle.
*9 It depends on the case, Please contact us for case availabilities.