|Barcode||Scan Engine||2D CMOS|
|Minimum Resolution||0.102mm~0.508mm (4mil~20mil)|
|Reading distance||50～760mm(1.97"～29.92") (*1)|
|Reading angle||Pitch:±60° Roll: 360° Skew motion:±60° (*1)|
|Reading code||1D: JAN/UPC/EAN, CODE11, CODE39, CODE93, CODE128, ITF(INTERLEAVED 2of5), DISCRETE 2of5, CHINESE 2of5, MATRIX 2of5, CODABAR(NW-7), MSI, GS1 DATABAR OMNIDIRECTIONAL, GS1DATABAR LIMITED, GS1DATABAR EXPENDED 2D: PDF417, MicroPDF417, Datamatrix, QR Code, Micro QR Code, Aztec, RSS, Composite, TLC-39, MaxiCode/Postal: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX)|
|Light sources||RED LED|
|Battery||Battery Capacity||Built-in, rechargeable, lithium-ion battery, 3.7V, 700mAh|
|Continuous operation time||34,000 scans（*2）|
|Power Source||Magconn USB Charging cable（*3）|
|Charging time||About 2 hours (Built-in battery）(*4)|
|Key input||2 trigger keys: left, right, or simultaneous|
|Communication||Interface||MFi on Lightning (*5)|
|Appearance||Dimensions(W)×(D)×(H)||63.7 × 9.7 × 117.2mm|
|Weight(with Battery)||68g (2.4oz)|
|LED||Non-blinking Blue LED: Connected with device (*6).
Blinking Blue LED: Reading Barcode.
Non-blinking Red LED: Battery is charging.
Faint Red LED: Battery is fully charged
|Environment||Operating environment||-10～45°C (14～113°F), 20～85% RH（Charge at 0°C (32°F) or more)|
|Storage environment||-20～60°C (-4～140°F), 10～95％RH|
|IP Rating||IP54 compliance|
|Anti-drop||Drop-tested on all six-sides and all 4 edges, once each, from 1.5m (5ft) (*7)|
|Certificate||Apple MFi / FCC / CE|
|Requirments||OS||iOS14 or later (except iOS9.2.x)|
|Bundled items||Magconn cable / Earphone extension cable / Installation instructions /manual|
*1 May depend on barcode type.
*2 Continuous operation time was tested with iPhone's default brightness setting.
*3 Standard iPhone 1A charger is strongly recommended to be used when using Magconn cable.
*4 iPhone and AsReader batteries will charge simultaneously. iPhone and AsReader batteries will be recharged in 3.5 hrs and 2 hrs respectively in simultaneous recharging mode.
*5 SDK is required and available for free download. Please contact us.
*6 Blue LED will turn on after iPhone/iPod is connected. LED will turn off after the reading the first tag.
*7 iPhone screen could be broken, depending on the drop angle.
*8 It depends on the case, Please contact us for case availabilities.