The ASR-010D device is a modular "sled" barcode scanner for many iOS devices and the best iPhone barcode scanner.
iPhone compatible (iPhone 7, iPhone 7Plus, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone SE, iPhone 5s, iPhone 5)
iPod touch compatible (iPod touch 5th Generation, iPod touch 6th Generation)
iPad compatible barcode scanner (iPad mini, iPad mini2, iPad mini3, iPad Air2, and iPad Pro9.7.)
All Major 1D barcodes are supported.
Model Name ASR-010D
Barcode Scan Engine CCD linear image sensor 1,500Pixel (1D)
Minimum Resolution 0.127mm (5mil)
Reading distance 70~210mm (2.76"〜8.27")(*1)
Reading angle Pitch: ±65°, Roll: ±25°, Skew motion: ±50° (*1)
Reading code JAN, UPC/EAN, CODE11, CODE39, CODE93,
Light sources RED LED
Battery Battery Capacity Built-in, rechargeable, lithium-ion battery, 3.7V, 700mAh
Continuous operation time 40,000 scans(*2)
Power Source Magconn USB Charging cable(*3)
Charging time About 2 hours (Built-in battery)(*4)
Key input 2 trigger keys: left, right, or simultaneous
Communication Interface MFi on Lightning (*5)
Appearance Dimensions(W)×(D)×(H) 63.7 × 9.7 × 117.2mm
Weight(with Battery) 68g (2.3oz)
Material PC
Case color White
LED Non-blinking Blue LED: Connected with device (*6).
Blinking Blue LED: Reading Barcode.
Non-blinking Red LED: Battery is charging.
Faint Red LED: Battery is fully charged
Environment Operating environment -10~45°C (14~113°F), 20~85 % RH(Charge at 0°C (32°F) or more)
Storage environment -20~60°C (-4~140°F), 10~95%RH
IP Rating IP54 compliance
Anti-drop Drop-tested on all six-sides and all 4 edges, once each, from 1.5m (5ft) (*7)
Certificate Apple MFi / FCC / CE
Requirments OS iOS13.2 or later (except iOS9.2.x)
Bundled items Magconn cable / Earphone extension cable / Installation instructions / manual

*1 May depend on barcode type.
*2 Continuous operation time was tested with iPhone's default brightness setting.
*3 Standard iPhone 1A charger is strongly recommended to be used when using Magconn cable.
*4 iPhone and AsReader batteries will charge simultaneously. iPhone and AsReader batteries will be recharged in 3.5 hrs and 2 hrs respectively in simultaneous recharging mode.
*5 SDK is required and available for free download. Please contact us.
*6 Blue LED will turn on after iPhone/iPod is connected. LED will turn off after the reading the first tag.
*7 iPhone screen could be broken, depending on the drop angle.
*8 It depends on the case, Please contact us for case availabilities.